San Clemente / California (949) 369-9100
Menu

Algae-X


Maintenance

Service Contracts

Repairs

Retrofits

Home
Servicing South Orange County / North San Diego County


|
|
Products
|
Fuel System Diagrams
|
Customers
|
Systems

Fuel Pumps


Carter Recirculating Pumps

Voltage
Flow
GPH
Pressure
(PSI)
Inlet/Outlet
Application
Part No.
12V DC
72
4 - 5.75
1/4" NPT for 3/8" Hose
Marine
P4389
24V DC
72
7
1/4" NPT for 3/8" Hose
Heavy Duty, Marine
P4603HD


  • Operates using leaded and unleaded gasoline, gasohol, diesel fuels and fuel boosters
  • Easy to install with complete installation package and instructions
  • Free-flow fuel delivery
  • Positive displacement pump - motor-driven rotary vane type
  • Constant fuel flow - non-pulsating pump
  •  Positive (+) or (-) ground
  •  Internal pressure regulating valve
  •  No points to burn out
  •  No rubber parts subject to deterioration
  •  72 or 100 Gallons Per Hour flow
  •  Filter required


SAFETY INTERLOCK CIRCUIT

It is recommerded that a Safety Circuit 0il Pressure Switch be used (Part No. A68301). This circuit stops the electric fuel pump should the engine stop without the ignition turned 'Off'. The additional safety warnings of 'low oil pressure' and 'broken oil lines' may also be incorporated.

NOTE: Due to the positive dIsplacement design, the rotary vane pump will not allow a pull-through arrangement and is designed to run while engine is running.

WARNING: THESE PUMPS ARE NOT INTENDED FOR AIRCRAFT USE. DO NOT USE TEFLON TAPE ON ANY FITTINGS.

WARNING: Limited life expectancy with methanol. Usage of Methanol voids warranty.
Unless otherwise indicated, these parts are not intended for use in emission controlled

vehicles that must comply with federal, state and/or local emmission regulations.



Tuthill High Volume Recirculating Pumps

Self-priming, rotary electric vane pumps for the transfer of diesel oil. They are equipped with self ventilating induction motor with IP 55 protection, class F insulation with thermal cut-out at 160 degrees Celcius located in the winding. By-pass valve is integrated into the pump body. The pump casting is in cast-iron, treated against corrosion and paint-finished; the pump rotor is in sintered steel; the stainless steel filter in incorporated in the pump body.
Not for use with Gasoline!

Voltage
Hz
Flow
GPH
Inlet/Outlet
Application
Part No.
115 V AC
60
950
1" NPT
Heavy Duty, Marine
PA1 60
230V AC
50
950
1" NPT
Heavy Duty, Marine
PA1 60
115V AC
60
1,580
1" NPT
Heavy Duty, Marine
PA2 100
230V AC
50
1,580
1" NPT
Heavy Duty, Marine
PA2 100



Reverso Gear Pumps

• Reversible

• Compact Dimensions

• Bronze gears & stainless steel shafts

• "CE" certified

• Transfer Rate: 2-6 GPM

The Reverso GP Series is designed to transfer lube oil, diesel fuel, antifreeze and water.
Not for use with Gasoline!


Voltage
Hz
Flow
GPH
Inlet/Outlet
Application
Part No.
12 V DC
60
3
3/8" NPT
Medium Duty, Marine
GP-302-12
24 V DC
60
3
3/8" NPT
Medium Duty, Marine
GP-302-24
12 V DC
60
6
1/2" NPT
Medium Duty, Marine
GP-602-12
24 V DC
60
6
1/2" NPT
Medium Duty, Marine
GP-602-24
110 V AC
60
3.5
3/8" NPT
Heavy Duty, Marine
GP-3AC-110/60
230 V AC
50
3.5
38/" NPT
Heavy Duty, Marine
GP-3AC-230/50



Please Contact Us for pricing or additional information

(949) 369-9100


Links

Stimulator
Sportfishing


Marine Forums

Boat Diesel

Jig Stop

Dana Point
Harbor


  2002-2004© Yacht Ready Consultants, Algae-X, Coast Information Technology